Magnifier Pivot Mount
The LaRue Magnifier Pivot Mount is a rugged, quick-detach flip-to-side magnifier mounting system designed to maintain correct optical alignment while allowing rapid transition between magnified and CQB configurations.
Built around LaRue’s proven spring-tensioned pivot mechanism, the Magnifier Pivot Mount uses a robust shaft and cam system with no buttons, switches, or fragile components. The magnifier can be deployed or stowed one-handed by pulling rearward, rotating into position, and releasing/locking solidly until intentionally moved again.
The mount places the magnifier at a 1.725″ centerline height (Tall and EOTech variants) or 1.5″ centerline height (Short variant), depending on configuration, ensuring proper alignment with common LaRue red-dot mounts. The design allows most flip-up rear sights to remain in place and clears standard flat-top receiver rails.
Each mount includes:
-
LaRue QD throw lever
-
Adjustment wrench
-
Blue Loctite
-
Installation hardware and instructions
The Magnifier Pivot Mount system is offered in multiple configurations to support different optics, heights, and mounting footprints while retaining the same core mechanical design and durability.
_______________________________________________________________________________________________________________________________________________________________________________
Larue Magnifier Pivot Mount Variations – Comparison Table
| LT755-30T (Tall) | LT755-30S (Short) | LT755-S-EO (EOTech) | |
|---|---|---|---|
| Intended Optics | Aimpoint / 30mm magnifiers | Aimpoint / 30mm magnifiers | EOTech G23 / G33 footprint |
| Centerline Height | 1.725″ | 1.5″ | 1.725″ |
| Magnifier Body Size | 30mm | 30mm | EOTech-pattern |
| Mount Style | QD Pivot (Flip-to-Side) | QD Pivot (Flip-to-Side) | QD Pivot (Flip-to-Side) |
| Designed Red-Dot Alignment | Lower 1/3 mounts | Absolute co-witness mounts | EOTech w/ 7mm riser |
| Compatible LaRue RDS Mounts | LT150, LT129, LT660, LT110*, LT659 | LT659NV, LT660HK, LT751 | EOTech EXPS series |
| Notes | Clears most BUIS; not compatible with MAKO magnifiers | Minor vertical offset adjustable via set screws | Flat-top only; not for raised LT110 rail |
| Primary Use Case | Taller optic stacks / lower 1⁄3 | Standard height setups | Dedicated EOTech magnifier systems |
20 Reviews Hide Reviews Show Reviews
-
LT755-S-EO
On the fence about spending more for this mount? Let me summarize it this way: EOTech should be including this mount with their magnifier. The LT755-S-EO is a direct replacement for the EOTech G23's included [brand omitted] flip to side mount and accompanying 7mm riser. It the G23 magnifier itself was easily removed from the stock mount using only a slotted screwdriver, the installed on the LT mount using the included hex-head screws and allen wrench. The build quaility on this mount is top notch just like the other LT products I've ordered. This mount does properly align the magnifier behind EOTech models with integrated 7mm risers, including the EXPS series.
-
LT755-30T
Perfect with my burris 3x behind my Eotech 553. Semper Fi
-
LT755-30T
works flawlessly with my burris 3x magnifier behind a red dot sight.
-
LT755-30S
Just got my LT755-30S in the mail today and it lines up perfectly with the Aimpoint PRO. Great quality. I understand why everyone speaks so highly of Larue products now. When you open your box you'll know what I'm talkin about.
-
LT755-30S
Just got my LT755-30S in the mail today and it lines up perfectly with the Aimpoint PRO. Great quality. I understand why everyone speaks so highly of Larue products now. When you open your box you'll know what I'm talkin about.
-
LT755-30S
when i saw this on the web i knew i had to have it for my aimpoint great peice.
-
LT755-30S
when i saw this on the web i knew i had to have it for my aimpoint great peice.
-
LT755-30T
i saw it on the web and knew i had to have it for my aimpoint. great mount
-
LT755-30T
i saw it on the web and knew i had to have it for my aimpoint. great mount
