Magnifier Pivot Mount
The LaRue Magnifier Pivot Mount is a rugged, quick-detach flip-to-side magnifier mounting system designed to maintain correct optical alignment while allowing rapid transition between magnified and CQB configurations.
Built around LaRue’s proven spring-tensioned pivot mechanism, the Magnifier Pivot Mount uses a robust shaft and cam system with no buttons, switches, or fragile components. The magnifier can be deployed or stowed one-handed by pulling rearward, rotating into position, and releasing/locking solidly until intentionally moved again.
The mount places the magnifier at a 1.725″ centerline height (Tall and EOTech variants) or 1.5″ centerline height (Short variant), depending on configuration, ensuring proper alignment with common LaRue red-dot mounts. The design allows most flip-up rear sights to remain in place and clears standard flat-top receiver rails.
Each mount includes:
-
LaRue QD throw lever
-
Adjustment wrench
-
Blue Loctite
-
Installation hardware and instructions
The Magnifier Pivot Mount system is offered in multiple configurations to support different optics, heights, and mounting footprints while retaining the same core mechanical design and durability.
_______________________________________________________________________________________________________________________________________________________________________________
Larue Magnifier Pivot Mount Variations – Comparison Table
| LT755-30T (Tall) | LT755-30S (Short) | LT755-S-EO (EOTech) | |
|---|---|---|---|
| Intended Optics | Aimpoint / 30mm magnifiers | Aimpoint / 30mm magnifiers | EOTech G23 / G33 footprint |
| Centerline Height | 1.725″ | 1.5″ | 1.725″ |
| Magnifier Body Size | 30mm | 30mm | EOTech-pattern |
| Mount Style | QD Pivot (Flip-to-Side) | QD Pivot (Flip-to-Side) | QD Pivot (Flip-to-Side) |
| Designed Red-Dot Alignment | Lower 1/3 mounts | Absolute co-witness mounts | EOTech w/ 7mm riser |
| Compatible LaRue RDS Mounts | LT150, LT129, LT660, LT110*, LT659 | LT659NV, LT660HK, LT751 | EOTech EXPS series |
| Notes | Clears most BUIS; not compatible with MAKO magnifiers | Minor vertical offset adjustable via set screws | Flat-top only; not for raised LT110 rail |
| Primary Use Case | Taller optic stacks / lower 1⁄3 | Standard height setups | Dedicated EOTech magnifier systems |
20 Reviews Hide Reviews Show Reviews
-
LT755-30T
Works with aimpoint 3X 1. You’ll need to cut the rubber ring on the front off for install. Pairs with aimpoint rds.
-
LT755-30T
Works with aimpoint 3X 1. You'll need to cut the rubber ring on the front off for install. Pairs with aimpoint rds.
-
LT755-30S
Got this mount yesterday and mounted it today. I went with the VFZ style not only to save $25.00, but with the Flip to Side pivot action, I have no need to remove it in a hurry. It moves out with a firm action and stays out. Very fine quality, I can see how they warranty it forever. And the customer service pre purchase was great! Thanks JP!
-
LT755-30S
Got this mount yesterday and mounted it today. I went with the VFZ style not only to save $25.00, but with the Flip to Side pivot action, I have no need to remove it in a hurry. It moves out with a firm action and stays out. Very fine quality, I can see how they warranty it forever. And the customer service pre purchase was great! Thanks JP!
-
LT755-30T
Second LaRue mount ive purchased from you guys and once again I couldn't be more happy with the mount. it does what its supposed to and it does it well. great construction, great company. I'll never shop elsewhere
-
LT755-30T
Second LaRue mount ive purchased from you guys and once again I couldn't be more happy with the mount. it does what its supposed to and it does it well. great construction, great company. I'll never shop elsewhere
-
LT755-30S
After searching for a quality flip to side for a while I finally came across the LT755. So far it's the purchase of the year!!! There are so many pieces of garbage out there that people are trying to pass off as a good FTS mount. This is the best one that I've seen without a doubt. It's stable and durable and sits perfectly behind my eotech XPS 2-0 when both are mounted on the same rail. I am so happy I chose to go with larue and I plan on doing more business with them in the future. This company has quality products and customer satisfaction as its backbone. You will see that the second you open the box. Very pleased, thanks again larue
-
LT755-30S
After searching for a quality flip to side for a while I finally came across the LT755. So far it's the purchase of the year!!! There are so many pieces of garbage out there that people are trying to pass off as a good FTS mount. This is the best one that I've seen without a doubt. It's stable and durable and sits perfectly behind my eotech XPS 2-0 when both are mounted on the same rail. I am so happy I chose to go with larue and I plan on doing more business with them in the future. This company has quality products and customer satisfaction as its backbone. You will see that the second you open the box. Very pleased, thanks again larue
-
LT755-30T
Amazing product! I have had mine for years with no problems and no regrets!
